Sliding Patio Doors Repair
Patio doors that slide open are a great way to enjoy your outdoor space, however they can become difficult to open or close. This can be caused by a variety of problems like dirty tracks or poorly aligned sliders.
Clean the track first and making sure that the rollers are lubricated. You can also adjust the rollers by using the adjustment holes located on the bottom of the door panel with movable doors.
Dirty or damaged track
A dirty or damaged track can cause the sliding door to not slide smoothly. Over time, dirt and grit, as well as rust can build up blocking the track from moving smoothly. The solution is a thorough cleaning using an abrasive and mild detergent. This process should be carried out regularly to ensure smooth operation and avoid costly repairs in the future.
A leaking door is another common issue that requires prompt attention to prevent mold growth, water damage and structural degradation. Most often, the issue is due to worn weather stripping and misaligned doors. sliding patio door repair near me can be corrected by replacing the weather stripping and by aligning the door.
Rollers that jump off the track are another problem that is often fixed with some simple DIY work. This task can be difficult so you may need a helper to assist you. In the house, and then lean a panel towards you to move the rollers. After lifting the panel off the bottom track, you'll need to set it on sawhorses to stop it from falling off. Then loosen the screws that hold each roller in place and remove them with a screwdriver. You can now clean any dirt that has accumulated between the wheels and the tracks. Clean each wheel with denatured alcohol on a rug. Reposition the wheels on their tracks and attach them once more.
If a section of the track is bent, it may be possible to straighten it by using a rubber mallet or block of wood. However when the bent section is near the hinges and has the potential to cause further damage, you'll be better off calling an expert to ensure safety.
Rollers that are misaligned
If your sliding door has difficulty sliding, it is likely that the rollers have been misaligned. The wheels could be dirty, rusted, or their bearings have worn out. This friction causes the door to become snagged and grind when opened or closed. This can also result in noises that squeak.
Fortunately it's a simple fix. The wheels are attached to the bracket, which can be adjusted, which means you don't have to remove the door. Utilize a screwdriver to find the adjustment holes on the frame (usually on either side). Turn the screws to control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise rotation lowers it. Continue to adjust the door until it is open and shuts effortlessly.
It is important to adjust the wheel prior to making adjustments to your latch. The latch hooks need to line up with the strike plate (the opening into which the latch locks) in order for the lock to function properly. If you don't do this, the latch could accidentally shut or open while you're not in the room.
A sliding patio door is an investment. Maintaining them in good working order will ensure the safety of your family. By fixing common issues such as broken tracks, rollers and handles, you can avoid costly repairs in the near future. If you need help with your patio doors, get in touch with our team. We will assess your needs for repair of your sliding patio door and help you keep it in top condition. Our professionals can also assist with any replacement parts you might require.
The door frame is loose or damaged
Sliding patio doors are a wonderful addition to any home and offer a stylish and practical alternative to swing-open or hinged doors for patios. But, just like other hardware doors, they can experience many issues in time. Many of these issues are fixable by using a bit of DIY knowledge.
A common problem that affects sliding patio doors is gaps in the frame. It can be caused by a number reasons, including misaligned rollers or track, a damaged door or track or a bent frame. In the majority of cases the reason for this problem can be easily fixed by taking the door off and reattaching the track or rolling elements. This should be done with care so as not to damage the frame or track.
In some cases it may be required for the entire track to be replaced. This can be accomplished easily using the universal kit that is available in most major hardware stores. These kits are easy to install and will have your door functioning correctly in no time.
Check your sliding door's hardware and frame for signs of wear, for example loose bolts or screws. This is a simple and efficient DIY patio maintenance task that is done using a screwdriver. It is also important to grease the rollers and tracks of your patio door to ensure smooth operation and keep them from wearing out prematurely.
For many homeowners who live in the city, their patio doors are the main entrance to their backyard and outdoor living space. Therefore, they have to to function correctly to maintain the comfort of their home and provide security. By taking the time to implement these simple DIY maintenance steps, homeowners can prolong the life of their sliding patio doors and minimize the cost of repairs or replacements.
Faulty Handle
The sliding patio doors are an excellent way to enter your home and get access to your backyard, but they can be difficult to operate if they become misaligned. A damaged handle could cause the door to get stuck or be difficult to open and close. Repairing a damaged handle can be done at home.
In most instances, a loose handle is merely the result of screws that have worked their way out of the backplate. To remedy the issue, tighten the screws on the inside handle using a screwdriver. If you find that the handle remains loose, it could be a sign that the threads are worn and need to be replaced.
A damaged latch could be the cause. It is more likely the latch will break if it's made of metal instead of plastic. If the latch isn't catching or turning, you should try oiling it first to see if it can help. If not, you could need to replace the lock entirely.
If the handle is cracked or broken, it may be difficult to use. If this is the case it is essential to replace it with a brand new handle that is in line with the design of your sliding patio door.
Feldco can help you restore your patio doors to their former glory, whether they are brand new or old and old-fashioned. We offer high-quality doors in a variety of sizes and styles that can be installed to perfectly fit your home. Contact us today for more about our products! We offer services to Southern California homeowners, including Ventura County and Orange County.
Faulty Weatherstripping
It's time to replace your weather stripping if see light in the windows and doors or feel a draft pulling at the door or window. The strips form a tight seal that keeps unwanted air, pests, and water from getting into your home. It also keeps your conditioned and heated air inside, saving you money on your energy bills all year long.
Depending on the condition of your weather stripping, it may have deflated, and lost its buoyant, positive seal. This can be identified by taking a dollar note and putting it under the seal on top of the door frame and below the jamb of the door where the two meet. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.
If you replace only the worn-out part of the weather stripping, this could result in future issues with the seal. It's much more efficient to replace all of the stripping. This will let you rest at ease knowing that your door will be sealed properly.
To make a DIY project that is simple follow our weather stripping project guide to remove old weather stripping. Then, you can apply the appropriate material to your sliding patio door and door frame to ensure a long-lasting and secure seal. This is a great method to save money on your energy bills and fix your sliding patio door. Don't wait until it's too late. Your wallet as well as your home will thank you.